Hardwood veneer in 1,2,4 foot wide and 4 or 8 long Hardwood veneer a furniture cabinet grade. Hardwood veneer is great for any woodworking project
ALL OF THE VENEERS ARE UNFINISHED READY TO FINISH
PAPER BACK
OUR PAPER BACKED VENEER IS 10MIL THICK about 1/28. YOU WOULD APPLY SOLVENT BASED CONTACT CEMENT TO BOTH THE PAPER SIDE OF THE VENEER AND THE SURFACE OF THE ITEM TO BE VENEERED. THE CONTACT CEMENT IS ALLOWED TO DRY TO THE TOUCH THEN THE VENEER IS PUT IN PLACE AND A ROLLER IS USED TO INSURE FULL CONTACT. ONCE THE CONTACT CEMENT TOUCHES EACH OTHER THE PIECES CAN NOT BE MOVED
PEEL AND STICK
OUR PRESSURE SENSITIVE VENEER IS ALSO 10MIL THICK TO INSTALL ALIGN THE VENEER SHEET ON THE SUBSTRATE SURFACE AND PULL BACK 2 INCHES OF THE RELEASE LINER. MAKE CONTACT WITH THE VENEER SHEET SURFACE AND MAKE CERTAIN THE ALIGNMENT INCORRECT. SLOWLY PEEL BACK THE RELEASE LINER WHILE APPLYING PRESSURE WITH A WOOD SCRAPER OVER THE ENTIRE AREA